Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  


Home >>  High Power Remote Kits >>  12 Channel DC/AC Power Kits >>  12 Channel DC Power 30A Heavy Duty RF Remote Control System

Stay In Touch

12 Channel DC Power 30A Heavy Duty RF Remote Control System


Price: US $398.00

Add to Cart:    Write Review

  • Model: 0020364 (12S1PUB-DC12/24 & CV-12)

Please Choose:
















This 12 channel 30A heavy duty rf remote control system has the special ability to learn remote codes, allowing it to be used in one-transmitter-to-many-receivers system. It operates in toggle, momentary, and latched mode (set the mode as you like freely). It is great for hard to reach lights or other DC/AC electrical devices, remote distance is up to 500m. Control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage AC110~240V or DC0~28V.


Manual

Feature:

  • Wireless control, easy to install
  • Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC110~240V or DC0~28V.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Audible / visual indication
  • Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/ several transmitters can control one/ several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:

  • Model No.: S1PUB-DC12 /S1PUB-DC24
  • Channel: 1 CH
  • Control Mode: Toggle, Momentary, Latched
  • Coding Type: Learning code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC12V±1V (S1PUB-DC12), DC24V±1V (S1PUB-DC24)
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • PCB size: 74mm x 52mm x 21mm
  • Case size: 79mm x 58mm x 35mm
  • Maximum Working Current: 30A

Transmitter:

  • Model No.: CV-12
  • Channel: 12 CH
  • Remote Control Distance: 500m / 1500ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit size: 110mm x 50mm x 18mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

  • Setting control mode Toggle: Only connect Jumper-1.
    Control mode Toggle: Press -> On; Press again -> Off.
    Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)
    Press button 1 again: Turn off Receiver 1 (disconnect B and C, connect A and B)
    Press button 2: Turn on Receiver 2 (connect B and C, disconnect A and B)
    Press button 2 again: Turn off Receiver 2 (disconnect B and C, connect A and B)
  • Setting control mode Momentary: Only connect Jumper-2.
    Control mode Momentary: Press and hold -> On; Release -> Off.
    Press and hold button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)
    Release button 1: Turn off Receiver 1 (disconnect B and C, connect A and B)
    Press and hold button 2: Turn on Receiver 2 (connect B and C, disconnect A and B)
    Release button 2: Turn off Receiver 2 (disconnect B and C, connect A and B)
  • Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
    Control mode Latched: Press -> On, other relays Off; Press another button -> Off.
    Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)
    Press other button: Turn off Receiver 1 (disconnect B and C, connect A and B)
    Press button 2: Turn on Receiver 2 (connect B and C, disconnect A and B)
    Press other button: Turn off Receiver 2 (disconnect B and C, connect A and B)

Package Include:

  • 12 x Receiver: S1PUB-DC12 /S1PUB-DC24 (1 Channel / Three Control Modes)
  • 1 x Transmitter: CV-12
  • 1 x User manual

Note:

  • The theoretical distance is 500m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 500m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model: 0020909) on the receiver for improve the range - Click here.
Ask A Question
* Required information

*
*
ujna
*