Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  


Home >>  Remote Control DC Lamp >>  Control 1 DC Lamp >>  Control High Power DC Lamp >>  1CH 30A DC Power Output Wireless Remote Control Switch Transmitter & Receiver

Stay In Touch

1CH 30A DC Power Output Wireless Remote Control Switch Transmitter & Receiver


Price: US $36.00

  • Model: 0020435 (S1PX-DC12/24 & C-2)

Please Choose:











Qty:   



 
 
Manual

Feature:

  • Wireless control, easy to install
  • Direct power output; control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Audible / visual indication
  • Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/ several transmitters can control one/ several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:

  • Model No.: S1PX-DC12 / S1PX-DC24
  • Channel: 1 CH
  • Control Mode: Toggle, Momentary, Latched
  • Coding Type: Fixed code / learning code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC12V±1V (S1PX-DC12), DC24V±1V (S1PX-DC24)
  • Output: DC12V (S1PX-DC12), DC24V (S1PX-DC24)
  • PCB Size: 74mm x 52mm x 24mm
  • Case Size: 79mm x 58mm x 35mm
  • Maximum Working Current: 30A
  • Maximum Power: 360W/12VDC or 720W/24VDC

Transmitter:

  • Model No.: C-2
  • Channel: 2 CH
  • Remote Control Distance: 100m / 300ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit size: 58mm x 39mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

  • 1) Setting control mode Toggle: Only connect Jumper-2.
    Press button 1: Turn on the relay, terminal OUT output DC power.
    Press button 1 again: Turn off the relay, terminal OUT no output.
  • 2) Setting control mode Momentary: Only connect Jumper-1.
    Press and hold button 1: Turn on the relay, terminal OUT output DC power.
    Release button 1: Turn off the relay, terminal OUT no output.
  • 3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
    Press button 1: Turn on the relay, terminal OUT output DC power.
    Press button 2: Turn off the relay, terminal OUT no output.

Package Include:

  • 1 x Receiver: S1PX-DC12 / S1PX-DC24 (1 Channel / Three Control Modes)
  • 2 x Transmitter: C-2
  • 1 x User manual

 Note:

  • The theoretical distance is 100m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 100m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model:0020909 ) on the receiver for improve the range - Click here.
Ask A Question
* Required information

*
*
wwvv
*