Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  


Home >>  DC Power Remote Kits >>  2CH DC Toggle Mode Kits >>  2 Channel 12V Power Output Toggle Mode Remote Control Kit— Waterproof Case

Stay In Touch

2 Channel 12V Power Output Toggle Mode Remote Control Kit— Waterproof Case


Price: US $39.00

Add to Cart:    Write Review

  • Model: 0020528 (S2RX-DC12 & C-2)

Please Choose:

















Manual

Application Video

Features:

  • Wireless control, easy to install
  • Wireless control 12V electronics including lights, LEDs, relays, dc motors and other low current devices.
  • You can control receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One or several transmitters can control one or several receivers simultaneously.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:

  • Channel: 2 CH
  • Control Mode: Toggle (Press -> On; Press again -> Off)
  • Coding Type: Fixed code
  • Power Supply (Operating Voltage):DC12V±1V
  • Output Voltage: DC12V±1V
  • PCB Size: 43mm x 33mm x 20mm
  • Case Size: 35mm x 58mm x 64mm
  • Maximum Working Current: 5A / each channel (2 Channels Available)
  • Connection wires: 20CM
  • With Black Waterproof Case

Transmitter:

  • Model No.: C-2
  • Channel: 2 CH
  • Remote Control Distance: 100m / 300ft (theoretically)
  • Encode: Fixed code by soldering
  • Unit Size: 58mm x 39mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Operation:

  • Press button A: Turn on lamp 1
    Press button A again: Turns off lamp 1
    Press button B: Turn on lamp 2
    Press button B again: Turns off lamp 2
  • Red    =  Input +12V
    Black  =  Input Ground (-)
    Yellow =  Output 1 +12V
    Brown  =  Output 1 Ground (-)
    Blue   =  Output 2 +12V
    Green  =  Output 2 Ground (-)

Package Include:

  • 1 x Receiver: S2RX-DC12 (2 Channels / Toggle Control Mode / DC12V)
  • 2 x Transmitter: C-2
  • 1 x User manual

Note:

  • The theoretical distance is 100m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 100m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model: 0020909) on the receiver for improve the range - Click here.
Ask A Question
* Required information

*
*
ifnc
*