Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  


Home >>  Remote Control Linear Actuator >>  Linear Actuator System >>  Long Distance Linear Actuator >>  2000M 1 Channel Tri-mode Forward & Reverse DC 9V 12V 24V Motor Remote Control Kit

Stay In Touch

2000M 1 Channel Tri-mode Forward & Reverse DC 9V 12V 24V Motor Remote Control Kit


Price: US $56.00

  • Model: 0020209 (S1FU-DC12-ANT2 & CB-3)

Please Choose:







Qty:   



This 1 channel dc rf remote control system operates in 315/433MHz frequency, voltage of AC110~240V or DC0~28V. It is great for hard to reach lights or other DC/AC electrical devices, remote distance is up to 2000m. Applications include light remote control, electric gate remote control, electric window / blind remote control, etc.


Manual


Package Include:
  • 1 x Receiver: S1FU-DC06-ANT2 / S1FU-DC09-ANT2 / S1FU-DC12-ANT2 / S1FU-DC24- ANT2 (Inversion Control Mode)
  • 1 x Transmitter: CB-3
  • 1 x User manual

Feature:
  • Wireless control, easy to install
  • Control motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Audible / visual indication
  • Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/several transmitters can control one/several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz
  • Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)

Receiver:
  • Model No: S1FU-DC06- ANT2 / S1FU-DC09- ANT2 / S1FU-DC12- ANT2 / S1FU-DC24- ANT2
  • Control Modes: Inversion (Toggle, Momentary, Latched)
  • Coding Type: Fixed code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage): DC12V±1V (S1FU-DC12- ANT2), DC6V (S1FU-DC06- ANT2), DC9V±1V (S1FU-DC09- ANT2), DC24V±1V (S1FU-DC24- ANT2)
  • Working Voltage Range of Relay: AC110~240V or DC0~28V
  • PCB size: 67mm x 50mm x 18mm
  • Case size: 75mm x 54mm x 27mm
  • Static Current: ≤6mA
  • Maximum Working Current: 10A

External Extend Antenna:
  • Frequency Range: 300~450MHz
  • Impedance: 50Ω
  • Antenna Length: 15cm
  • Cable Length: 150cm
  • Weight: 35g
  • Anti-interference, waterproof, shielded wire set inside
  • Magnetic stand design for easy to install

Transmitter:
  • Model No: CB-3
  • Channel: 3 CH 
  • Remote Control Distance: 1000m / 3000ft (theoretically) 
  • Encode: Fixed code by soldering 
  • Unit size: 135mm x 42mm x 25mm 
  • Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months) 

Usage:
  • Connect the motor to Terminal B of relay 1 and relay 2.
  • Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as following operation):
  • Setting control mode Toggle: Only connect Jumper-2.
  • Control mode Toggle: Press -> Rotate; Press again -> Stop.
  • Press button A: Terminal B of relay 1 and relay 2 output + DC (1: +, 2: -), motor rotates in the positive direction.
  • Press button A again: Terminal B of relay 1 and relay 2 no output, motor stops
  • Press button B: Terminal B of relay 1 and relay 2 output - DC (1: -, 2: +), motor rotates in the reversal direction.
  • Press button B again: Terminal B of relay 1 and relay 2 no output, motor stops

  • Setting control mode Momentary: Only connect Jumper-1.
  • Control mode Momentary: Press and hold -> Rotate; Release -> Stop.
  • Press and hold button A : Terminal B of relay 1 and relay 2 output + DC (1: +, 2: -), motor rotates in the positive direction.
  • Release button A: Terminal B of relay 1 and relay 2 no output, motor stops
  • Press and hold button B: Terminal B of relay 1 and relay 2 output - DC (1: -, 2: +), motor rotates in the reversal direction.
  • Release button B: Terminal B of relay 1 and relay 2 no output, motor stops

  • Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
  • Control mode Latched: Press button A and B -> Rotate; Press button C -> Stop.
  • Press button A: Terminal B of relay 1 and relay 2 output + DC (1: +, 2: -), motor rotates in the positive direction.
  • Press button B: Terminal B of relay 1 and relay 2 output - DC (1: -, 2: +), motor rotates in the reversal direction.
  • Press button C: Terminal B of relay 1 and relay 2 no output, motor stops

  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully.

Ask A Question
* Required information

*
*
vqxg
*