Archives

All posts for the month September, 2014

Question from customer:

“I’d like to order a 220v electric hoist to raise and down a bridge boat with a remote control.

The ascent and descent should be done when someone is still pressing the remote control button, as there is no stop. What would you like me the most suitable product? Thank you in advance.”

electric hoist

Answer:

We recommend the ac 100V~240V momentary motor controlling model (S1FM-AC220 & CV-2-2). It is specially designed for motor controlling because two relays are inserted inside. One relay is used for motor rotating towards “UP”. Another relay is used for motor rotating towards “DOWN”. There are “UP”, “COM” and “DOWN” contacts from output terminal. This kit can controls motor of rolling blinds, doors, projection screens, awnings, pumps, conveyors other appliances and mechanicals. The transmitting distance is usually about 500m in the open air.

motor controller

Wiring:

Connect live wire to terminal “L” and neutral wire to terminal “N”. Then connect AC electric hoist motor to terminals “UP”, “COM” and ‘DOWN”. You can exchange “UP” and “DOWN” wires of motor to change rotating direction of motor.

wiring

Operation:

There are three buttons on the receiver for motor up and down. But button ■ on the receiver is useless.

Press and hold button ▲ on remote or receiver: Terminals UP and COMMON directly output AC110V / AC220V; electric hoist motor rotates continuously in positive direction.

Release button ▲ on remote or receiver: Stop the electric hoist motor.

 

Press and hold button ▼ on remote or receiver: Terminals DOWN and COMMON directly output AC110V / AC220V; electric hoist motor rotates continuously in reversal direction.

Release button ▼ on remote or receiver: Stop the electric hoist motor.

Share Button

Question from customer:

I’m looking for an RC transmitter and receiver to operate the 4″ actuator a distance of 200ft for steering a lawnmower. Any suggestions?

700-590742

Answer:

We recommend the model of 500m/1500ft RF motor controller (S1FC-DC09/12/24 & CV-4-2). The controller is activated by DC 9V, 12V and 24V. It is usually for motors of rolling blinds, doors, projection screens, awnings, pumps, winches, conveyor or other appliances and mechanicals. It features in forward-reverse-stop capability which can make motor rotate in positive or reversal direction. With maximum transmission distance of 500m/1500ft, it can satisfy your requirement. Inner circuit of this kit uses the RF technology for making a wireless remote, which can make motor controlled by transmitter from any places with in reliable distance, this configured wireless signal can pass through walls, doors or floors or other solid obstacles.

1_13_1

Here is the wiring.

At first, we connect power line to terminals “+” and “-”. Secondly, we connect the receiver to the lawnmower actuator motor. Lawnmower actuator motor is wired to UP and DOWN terminals of receiver. At last, we add power supply to receiver. You can exchange “UP” and “DOWN” lines of the motor to change rotating direction of the motor.

1_06

There two working modes in it.

Set Momentary control mode: Do not connect Jumper.

Press and hold button ▲ on remote or receiver: Terminals UP and DOWN output + DC9V / DC12V / 24V (UP: +, DOWN: -), lawnmower actuatormotor rotates continuously in positive direction.

Release button ▲ on remote or receiver: Stop the motor.

Press and hold button ▼ on remote or receiver: Terminals UP and DOWN output - DC9V / DC12V / 24V (UP: -, DOWN: +), lawnmower actuatormotor rotates continuously in reversal direction.

Release button ▼ on remote or receiver: Stop the motor.

 

Set Latching control mode: connect the Jumper.

Press button ▲ on remote or receiver: Terminals UP and DOWN output + DC9V / DC12V / 24V (1: +, 2: -), lawnmower actuatormotor rotates continuously in positive direction.

Press ■ on remote or receiver: Stop the motor.

Press button ▼ on remote or receiver: Terminals UP and DOWN output - DC9V / DC12V / 24V (1: -, 2: +), lawnmower actuatormotor rotates continuously in reversal direction.

Press button ■ on remote or receiver: Stop the motor.

Share Button