remote controller

All posts tagged remote controller

My parents are farmers who always store the grain in the warehouse in every harvest season. But the warehouse sometimes is an attic. They usually have to hoist grain bag to the attic by themselves in the past. Actually, that is energy-consuming working. It is too difficult for aged parents to hoist those heavy bags of grains now. So they want to know if there is an easier way to hoist grain.

So I choose this set of controller, Model 0020337(S1FM-DC12&CV-2)which is strongly recommended by the supplier. They said the major characteristic of this receiver is to make the motor in the winch rotate in positive and reversal direction. That is to say, the rope of winch will be stretched out and drawn back by wireless remote controller. The transmitter is also easy to use for my parent.

Here are transmitter and receiver.

1_01

We install immediately. The wires from the winch are connected to the receiver. Then we just try to hoist heavy stuff. We hook up the bag, pressing and holding button ▲ on transmitter. With the motor of winch working continuously in the “UP” direction, the rope is drawn back and the bag is hoisted; When the bag is hoisted to the attic, release button ▲, the motor of winch stops working. After putting away the grains bag, we press and hold button ▼ on transmitter, the motor works continuously in the “DOWN” direction , the rope is stretched out and then it reaches the ground.

S1FM-DC&winch2

Online shop: www.ourautomation.com

Share Button

Electromagnetic lock is a locking device that consists of an electromagnet and an armature plate. The principle behind an electromagnetic lock is the use of electromagnetism to lock a door when energized. Essentially it consists of an electromagnet attracting a conductor with a force large enough to prevent the door from being opened.

electromagnetic lock copy

That is to say, if only we could cut off power supply and make electromagnet force between electromagnet and armature plate to disappear, the door would be opened. Furthermore, we just try to use a direct dc output momentary remote and one button transmitter to cut off electric power to open the door. The following demonstration will show.

At first, we prepare material.

material preparation copy

The wiring

wiring

When we supply power to electromagnetic lock, electromagnet will attract armature plate through magnetic force. The door is locked. When we press button, the power supply will be cut off. The door is open as soon as electromagnetic lock unlock instantly.

operation

What’s more, this rf remote control sends out rf signal which can pass through walls, doors as well as other barriers. You can remote control the electromagnetic lock to open the door as long as you stay within a reliable distance.

Share Button
You decided to install a security system with video camera in somewhere in you new house, the door gate, garage, porch, living room, bedrooms. Maybe you wonder whether it is possible to wire some video cameras to be controlled by one remote controller or not. We have many kinds of remote controllers and we consider a set handy electronic gadget can help you. CB series transmitter,(http://www.ourautomation.com) Model 0021027(CB-6) is one of those transmitters, which can connect with 6 receivers. It pairs with the wireless receiver, Model 0020360(S1UB-DC12). You can control video cameras with just one remote controller easily.
Image
Image

It is so easy to install. Look at the wiring picture.

Image

Image

Wires on the video camera should be connected to the wireless receiver and power supply. From the picture, the red wire from the video camera is connected to B terminal of the wireless receiver and the black wire is connected to negative electrode of the power supply. The positive wire of the power supply is connected to C terminal of the receiver.

The remote controller and wireless receivers should come to the “Toggle Mode”. This means pressing each button controls each video camera on or off separately.

When press button 1, the remote controller is triggered and sends out an RF signal “ON” to the wireless receiver. After the wireless receiver receives the signal, the corresponding video camera is on. When press button 1 again, the remote controller is triggered and sends out an RF signal “OFF” to the wireless receiver. After the wireless receiver receives the signal, the corresponding video camera is off…

It is really a simple and convenient way to control all video cameras from one remote controller.

 

Share Button

We are looking for a remote light switch kit to remote control light through a hallway at a restaurant. It is meant to signal the server that food is ready in the kitchen. We are looking at the Long Range 2000M 1 CH Momentary Remote light switch kit. This looks like a reliable solution but I have a question… Is there any way of knowing if the light attached the wireless receiver is actually turned on without seeing it. I realize the bulb may blow now and then, but on the whole they need to be sure in the kitchen when they signal the server the light is actually on. We look forward to this solving our problem with one of your remote light switch products.

We recommend this customer to choose remote light switch model: 0020104 (S1PUW-DC12-ANT2 & CC-2 or CC-1). According to his description, he wants a remote light switch kit that has two-way function or feedback function. This remote light switch model is definitely suitable for him to remote control light at his restaurant.

2345_image_file_copy_6

The long range remote light switch kit has feedback function which can let the user know whether he/she had already connected the remote controller and wireless receiver successfully in such a long distance. Two ways working mode, when the wireless receiver gets the signal of remote controller, it will immediately send a return signal to the remote controller.

The remote light switch kit can be used to control both DC0~28V and AC110~240V equipments.

Notice: The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals A and B are Normally Open; Terminals A and C are Normally Closed.

If you want to remote control a DC12V light with the remote light switch, do as following:

1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power adapter “-” to terminal “N / -“.

2) Connect Terminal A to the positive pole of the light, connect Terminal B to the positive pole of the power supply, and connect both light and power supply’s negative pole.

If you want to remote control an AC220V light, do as following:

1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power adapter “-” to terminal “N / -“.

2) Connect Terminal A to the light, connect Terminal B to the live wire of the power supply, and connect light and power supply’s neutral wire.

By using this long range remote light switch kit to remote control light, the server of the restaurant can easily know whether the food is ready or not in the kitchen. This will bring a lot of convenience for all the members of the restaurant. In addition, such method may let the customers feel more satisfied because it will shorten their time for waiting their food.

If you have the similar problem like this customer, or in other words, if you want to remote control light, you can enter into our website to choose the remote control kit you like.

Online shop: http://www.ourautomation.com.

Share Button
Generally speaking, remote light switch kit consists of wireless receiver and remote controller. You can control almost all the equipments by using the remote light switch kit. Setting the wireless receiver on the equipments, using the remote controller to transmit RF signal to the wireless receiver. When the wireless receiver gets the RF signal, it can control the equipments.
Some customers will find that the actual distance is not so long in real practice. In this case, you may doubt that the products are of poor quality or the working distance is wrong. That is not true. Here we want to recommend that all the working distance of our remote light switch products is a theoretical data, it shall be operated in an open ground, no barriers, no any interference.
Take remote light switch model 0020144(S1M-DC12-ANT2 & CB-1) as an example, the distance 2000m is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, the remote light switch mode 0020114 will be hindered by trees, walls or other constructions, and will be exposed to some interference by other signals. Therefore, the actual distance may or may not reach 2000m.
The working distance of the remote controller for the remote light switch refers to the sensitivity of the wireless receiver when it receiving the signal and the capacity of the remote controller. The sensitivity of the wireless receiver for the remote light switch depends on the antenna.
So, if you want to have the longest distance, you may first choose a high power remote controller. When you want to control the devices outside the house or from a far distance, it is better to choose remote controller with external antenna.
Trees, water, cement or other constructions will all reduce the signal of the remote controller. You may set the wireless receiver on a higher place to get a better signal.
How to get the longest distance of the remote controller for the remote light :
First, choose the suitable remote light switch kits and its accessories to get a longest distance.
(1)Transmitter: you can choose a high power transmitter to get a longest distance.
There are some examples:
Model Working Distance Size
CP-2 500m (theoretical) 135mm x 42mm x25mm
CB-2 1000m (theoretical) 135mm x 42mm x25mm
CC-2 5000m (theoretical) 135mm x 42mm x 25mm
e r
t
(2)Wireless receiver: Normally, almost all the wireless receiver consists of their own internal antenna. You’d better choose the wireless receiver with external antenna. External antennas consist of magnetic sucker antenna (longer distance) and telescopic antenna (middle distance). According to the environment, choose the suitable external antenna for your receiver so that it can get a longest distance.
There are some examples:
q w 1 1_08
Tips:
a) Stand the antenna on end;
b) Completely stretch the antenna.
By doing this, you can get a better signal, therefore, you can get a longest distance.
(3)The external antenna can be set on both receiver and transmitter.
Second, operate the remote light switch kit in a right way to make sure that you can get a longest distance.
  • The battery power of transmitter must be adequate and the battery voltage must higher than the theoretical level. For example, the battery voltage of transmitter is 12V, when the battery power is adequate, the voltage will higher than 12V, may be 12.1V or 12.2V.
  • The battery voltage of receiver must be adequate and must be within the working range. Using regulated power supply and choosing the good quality power adapter. If the receiver is using the storage battery, then the battery capacity must be high.
  • Don’t put the receiver in a metal box, because the signal weakens greatly by the metal. The solution is set an external magnetic sucker antenna outside the metal box.
  • When the wireless receiver cannot receive the RF signal from the remote controller, which means the working distance of the remote light switch may not reach the theoretical data. Then you can choose a signal repeater model 0010001(R-01) to solve this problem.
Apart from the above information we have mentioned, there is another important news we want to show you.
In the past, we only have CB series remote controller for the remote light switch, which working distance is 1000m. Now, we have CC series remote light switch for the remote light switch, its theoretical working distance can reach about 5000m, which is much longer than 1000m.
We also produce a new series of remote light switch kits. The working distance is 5000m.
These remote remote light switch kits have feedback function and two ways working mode.
With the feedback function, the remote light switch kits can let the user know whether he/she had already connected the remote controller and wireless receiver successfully in such a long distance.
Here is the principle of the feedback function for this remot light switch kit.
[Remote Controller]   <———
|                         \
[Encode]                       \
|                            |
[Channel]                [Feedback]
|                            |
[Decode]                       /
|                          /
[Wireless Receiver]     ———->
Two ways working mode of the remote light switch: When the wireless receiver gets the signal from remote controller, it will immediately send a return signal to the remote controller. When the remote controller receives the feedback signal from the wireless receiver, the remote controller will exude a buzzing sound like “D~” which means it receive the feedback signal successfully.
The wireless wireless for the remote light switch is waterproof case with waterproof connectors. The wireless receiver can be installed outdoors. They are also high power remote light switch kits, each relay output can work at maximum current 30A.
External magnetic sucker antenna for the remote light switch with 5meters cable, the antenna can be installed outside the building to get better working distance
The remote light switch kits can be used in agriculture automation, industry automation, and home automation. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.
There are some examples:
Remote Light Switch for motor boat
t01dda278368155b465
Remote Light Switch for the hunting pitfall
330693037
Remote Light Switch for the movement of the target in the shooting gallery
phuket-shooting-range-3-500x333
Remote Light Switch for the vending machine
minibank
Remote Light Switch for the LED of the business signs
Big_screen_led_display_billboard_advertising_board
You can view  http://www.ourautomation.com/-c-505.html  to choose the wireless remote control kit.
Share Button

Remote Light Switch for the Track

   Remote light switch for the track in a long distance can easily be done by our new products
    This is a real case..
    Someone needs to set up remote light switch for the track and this would be done with wireless switching. Our new remote light switch products can help him to achieve this operation.
    He said that the signal needs to travel at least 3000 meters so the 5000m setup would be best. The wireless receivers will trigger emergency flashing beacons.The layout is for motorcycle oval track competition and the remote controller and wireless receivers need to be operated by officials to ensure the safety of all competitors. This remote light switch is done by operating warning revolving beacons. For this reason the customer need our best operating combinations over a distance of probably 4000 to 4500 meters with direct line of sight available to remote control light switch….so he gather the 5000m Long Distance combination (with separate antenna) would be the best option for the remote light switch.
12 volt equipment is being used for all emergency lighting via a 12 Volt DC power source.
filename-1
MP1,MP2,MP3 and MP4 are corner marshalling points and the remote controllers only need the ability to switch the corresponding relay for that corner (MP1 to L1, MP2 to L2, MP3 to L3 and MP4 to L4 yellow on diagram). There needs to be no interference between each of these MP points so they can be operated independently of each other. Therefore each MP remote controller only needs to be one (1) channel. 
The remote controller CC1 for the remote light control -Is the main central control for the marshalling and is operated by the steward of the event. The Steward will be mobile so this remote controller will not be at any fixed point. To enable the Steward to have total control and over-ride the operations of officials at all MP points this remote controller for the remote light switch will need to be of 6 Channel operation, one channel for each MP (yellow) point (channels 1 to 4) and one channel (number 5) to operate simultaneously all RED receivers on points L1, L2, L3 and L4. This is to enable the stoppage of a race at any time by switching to a “STOP” light at all these points. Button number 6 can be spare.
SG1 – Is for the operation of the starting mechanism for each race (which could be up to 100) during the event.
This remote controller for the remote light switch needs to be 2 Channel to enable the switching of 2 GREEN (GL1 and GL2) lights at the starting area from Channel 1 and Channel 2 will activate 2 solenoids (SR1 and SR2). Therefore the remote controller for the remote light switch needs to be 2 channel and SR1, SR2, GL1 and GL2 receivers all each need to be 1 channel. GL1 and GL2 have to operate simultaneously from Channel 1 and SR1 and SR2 have to work simultaneously from Channel 2.
    According to all the information he has mentioned above, we recommend him a series of long distance wireless remote control kits to remote light switch. The theoretical working distance of the remote light switch can reach about 5000m.
2345_image_file_copy_6
These remote light switch kits have feedback function and two ways working mode.
With the feedback function, they can let the user know whether he/she had already connected the remote controller and wireless receiver for the remote light switch successfully in such a long distance.
Two ways working mode: When the wireless receiver for the remote light switch gets the signal of remote controller, it will immediately send a return signal to the remote controller. When the remote controller  receives the feedback signal of the wireless receiver for the remotte light switch, the remote controller for the remote light switch will exude a buzzing sound like “D~” which means it receive the feedback signal successfully.
The wireless receiver for the remote light switch is waterproof case with waterproof connectors. The wireless receiver for the remote light switch can be installed outdoors. They are also high power remote light switch control kits, each relay output can work at maximum current 30A.
External magnetic sucker antenna with 5meters cable, the antenna for the remote light switch can be installed outside the building to get better working distance
The remote light switch kits can be used to remote light switch, agriculture automation, industry automation, and home automation. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.
Share Button

We recommend the wireless DC motor controller here. It is model: 0020601(S1PF3-DC12& 2CWC-3). The wireless system includes the receiver (S1PF3-DC12) and the transmitter (CWC-3). The transmitter could wireless remote control the receiver. So you can connect DC motor to receiver, then use the transmitter to remote control motor rotation. Besides, the wireless controller has restrictive function. That means you can connect two restrictive switches to receiver and use them to stop motor rotation.

1

 

Here is the circuit diagram of receiver. You can connect DC motor to terminal “Output” in the receiver. Then supply power to receiver. There are three ways to wireless remote control motor rotation.

When you press button▲of transmitter, motor rotates in positive direction; Press button▼, motor rotates in reversal direction; press button●, motor stops rotating.

When you press button K3 of receiver, motor rotates in positive direction; press button K1, motor rotates in reversal direction; press button K2, motor stops rotating.

You can also connect two restrictive switches to terminals “X1” and “X2”. Connect the restrictive switch “X1”, motor rotates in positive direction; disconnect the restrictive switch “X1”, motor stops rotating. Connect the restrictive switch “X2”, motor rotates in reversal direction; disconnect the restrictive switch “X2”, motor stops rotating.

RF Wireless Remote Control DC Motor Controller / Transmitter &

 

If you want to know more about the wireless DC motor remote controller, you can enter int o the website and search the product as following:

 

Share Button

We recommend the wireless remote control equipment. It is model: S1T-DC12-ANT1 & CWB-1. The receiver (S1T-DC12-ANT1) is 1 CH and can connect one appliance to relay. The power supply includes DC 06/09/12/24V. The transmitter (CWB-1) can remote control the appliance on/off within 50m/150ft theoretically. The wireless equipment remote control lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. You can connect one DC motor to receiver and use the transmitter remote control motor rotation or stop.

QQ图片20150904172236

Here is the circuit diagram of receiver. You can connect one DC 12V motor to B terminal of relay in the receiver. Then supply power DC12V to receiver by connecting positive pole and negative pole to power terminal. Besides, you should connect “B & C” terminal to power terminal. When you press the button of transmitter, the motor will rotate or stop by wireless remote control.

circuit diagram

The wireless remote control equipment is toggle control mode. You can operate as the process:

Press button: Turn on motor (connect B and C, disconnect A and B)

Press button again: Turn off motor (disconnect B and C, connect A and B)

Finally you can enter into the website and search the wireless remote control equipment as following:

Model: 0020246 (S1T-DC12-ANT1 & CWB-1)

Website:

http://www.ourautomation.com/-p-753.html

Share Button

Whether you’re reading in the comfort of your bed or setting just the right mood for watching a movie, remote light switch means never having to get up out of your favorite chair to switch ON/OFF your CFL bulb. If you want a remote light switch product to control one(multiple) CFL bulb(s) in a super long range, but still worry about that you may don’t know if the CFL bulb attached the wireless receiver is actually on/off in such a long distance .

We think remote light switch 0020114 (S1PXW-DC12-ANT2 & CC-2) may the choice for you. Because the remote light switch 0020114 can reach 2000, 3000m, 4000m or 5000m in different circumstances. With two-way feedback function, the CFL Bulb will turn on/off when you press on the button of the remote controller. And when the CFL Bulb is on/off, the wireless receiver will immediately send a return signal to the remote controller. After the remote controller receives the feedback signal, it will exude a buzzing sound like “D~” which means CFL Bulb has been turned on/off successfully. The two-way feedback function of remote light switch can make the user know whether ha/she has turned on/off CFL Bulb in such a long distance.

2000-5000M Remote Light Switch for CFL Bulb

Here is the wiring for a DC CFL bulb with the remote light switch 0020114.

Let’s see the material preparation:

1 x wireless receiver S1PXW-DC12V-ANT2

1 x remote controller CC-2

1 x DC 12V power adapter

1 x DC CFL bulb

2000-5000M Remote Light Switch for CFL Bulb

Neutral wire and live wire from the DC CFL bulb should be respectively connected to Terminal “A”Terminal “B”of the wireless receiver. Connect live wire and neutral wire of Power Adapter respectively to “+” and “-”of power supply.

2000-5000M Remote Light Switch for CFL Bulb

Set the control mode latched(with remote controller CC-2): Turn on the second and third bit of the dip switch.

Control mode Latched:

Press the big button on the remote controller-> CFL bulb is on;

Press the small button on the remote controller -> CFL bulb is off.

Pair the remote controller to the wireless receiver:

Press button K1 of wireless receiver for 1- 2 seconds; signal LED on the wireless receiver is on. Thewireless receiver enters into status of LEARNING.

Press any one button on remote controller. If signal LED flashes twice, it means learning is successful.

2000-5000M Remote Light Switch for CFL Bulb

Press the big button on the remote controller, the CFL bulb is on.

2000-5000M Remote Light Switch for CFL Bulb

Press the small button on the remote controller, the CFL bulb is off.

2000-5000M Remote Light Switch for CFL Bulb

If you are intereated in our remote light switch products, please enter into the site:

http://www.ourautomation.com

Share Button

Whether you’re reading in the comfort of your bed or setting just the right mood for watching a movie, remote light switch means never having to get up out of your favorite chair to switch ON/OFF your CFL bulb. If you want a remote light switch product to control one(multiple) light bar(s) in a super long range, but still worry about that you may don’t know if the light bar attached the wireless receiver is actually on/off in such a long distance .

We think remote light switch 0020114 (S1PXW-DC12-ANT2 & CC-2) may the choice for you. Because the remote light switch 0020114 can reach 2000, 3000m, 4000m or 5000m in different circumstances. With two-way feedback function, the light bar will turn on/off when you press on the button of the remote controller. And when the light bar is on/off, the wireless receiver will immediately send a return signal to the remote controller. After the remote controller receives the feedback signal, it will exude a buzzing sound like “D~” which means light bar has been turned on/off successfully. The two-way feedback function of remote light switch can make the user know whether ha/she has turned on/off light bar in such a long distance.

QQ图片20150827151517

Here is the wiring for a light bar with the remote light switch 0020114.

Let’s see the material preparation:

1 x wireless receiver S1PXW-DC12V-ANT2

1 x remote controller CC-2

1 x DC 12V power adapter

1 x DC light bar

QQ图片20150827152522

Neutral wire and live wire from the light bar should be respectively connected to Terminal “A” Terminal “B”of the wireless receiver. Connect live wire and neutral wire of Power Adapter respectively to “+” and “-”of power supply.

QQ图片201508271537158.26_5

Set the control mode latched(with remote controller CC-2): Turn on the second and third bit of the dip switch.

Control mode Latched:

Press the big button on the remote controller-> light bar is on;

Press the small button on the remote controller -> light bar is off.

Pair the remote controller to the wireless receiver:

Press button K1 of wireless receiver for 1- 2 seconds; signal LED on thewireless receiver is on. The wireless receiver enters into status of LEARNING.

Press any one button on remote controller. If signal LED flashes twice, it means learning is successful.

QQ图片20150827154316

Press the big button on the remote controller, the light bar is on.

QQ图片20150827145918

Press the small button on the remote controller, the light bar is off.
QQ图片20150827145432

If you are intereated in our remote light switch products, please enter into the site:

http://www.ourautomation.com

Share Button