Long Range RC

 Long range RC for the track can easily be done by our new products
    This is a real case for the long range RC.
    Someone needs to set up long range RC light for the track and this would be done with wireless switching. Our new long range RC products can help him to achieve this operation.
    He said that the signal needs to travel at least 3000 meters so the 5000m setup would be best. The wireless receivers will trigger emergency flashing beacons.The layout is for motorcycle oval track competition and the remote controller and wireless receivers for the long range RC need to be operated by officials to ensure the safety of all competitors. This long range RC is done by operating warning revolving beacons. For this reason the customer need our best operating combinations over a distance of probably 4000 to 4500 meters with direct line of sight available to remote control light switch….so he gather the 5000m Long Distance combination (with separate antenna) would be the best option for the remote light switch.
12 volt equipment is being used for all emergency lighting via a 12 Volt DC power source.
filename-1
MP1,MP2,MP3 and MP4 are corner marshalling points and long range RC only need the ability to switch the corresponding relay for that corner (MP1 to L1, MP2 to L2, MP3 to L3 and MP4 to L4 yellow on diagram). There needs to be no interference between each of these MP points so they can be operated independently of each other. Therefore each MP remote controller only needs to be one (1) channel. 
The RF remote controller CC1 for the long range RC light -Is the main central control for the marshalling and is operated by the steward of the event. The Steward will be mobile so this remote controller will not be at any fixed point. To enable the Steward to have total control and over-ride the operations of officials at all MP points this remote controller for the remote light switch will need to be of 6 Channel operation, one channel for each MP (yellow) point (channels 1 to 4) and one channel (number 5) to operate simultaneously all RED receivers on points L1, L2, L3 and L4. This is to enable the stoppage of a race at any time by switching to a “STOP” light at all these points. Button number 6 can be spare.
SG1 – Is for the operation of the starting mechanism for each race (which could be up to 100) during the event.
This long range RC for the remote light switch needs to be 2 Channel to enable the switching of 2 GREEN (GL1 and GL2) lights at the starting area from Channel 1 and Channel 2 will activate 2 solenoids (SR1 and SR2). Therefore the long range RC for the remote light switch needs to be 2 channel and SR1, SR2, GL1 and GL2 receivers all each need to be 1 channel. GL1 and GL2 have to operate simultaneously from Channel 1 and SR1 and SR2 have to work simultaneously from Channel 2.
    According to all the information he has mentioned above, we recommend him a series of long distance wireless remote control kits to long range RC light switch. The theoretical working distance of the long range RC can reach about 5000m.
2345_image_file_copy_6
These long range RC kits have feedback function and two ways working mode.
With the feedback function, they can let the user know whether he/she had already connected the remote controller and wireless receiver for the remote light switch successfully in such a long distance.
Two ways working mode: When the wireless receiver for the long range RC gets the signal of remote controller, it will immediately send a return signal to the remote controller. When the remote controller  receives the feedback signal of the wireless receiver for the remotte light switch, the remote controller for the long range RC will exude a buzzing sound like “D~” which means it receive the feedback signal successfully.
The wireless receiver for the long range RC is waterproof case with waterproof connectors. The wireless receiver for the remote light switch can be installed outdoors. They are also high power remote light switch control kits, each relay output can work at maximum current 30A.
External magnetic sucker antenna with 5meters cable, the antenna for the remote light switch can be installed outside the building to get better working distance
The long range RC kits can be used to remote light switch, agriculture automation, industry automation, and home automation. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.
Share Button
    Long range RC for the track can easily be done by our new products
    This is a real case for the long range RC.
    Someone needs to set up remote light switch for the track and this would be done with wireless switching. Our new long range RC products can help him to achieve this operation.
    He said that the signal needs to travel at least 3000 meters so the 5000m setup would be best. The wireless receivers will trigger emergency flashing beacons.The layout is for motorcycle oval track competition and the remote controller and wireless receivers need to be operated by officials to ensure the safety of all competitors. This long range RC is done by operating warning revolving beacons. For this reason the customer need our best operating combinations over a distance of probably 4000 to 4500 meters with direct line of sight available to remote control light switch….so he gather the 5000m Long Distance combination (with separate antenna) would be the best option for the remote light switch.
12 volt equipment is being used for all emergency lighting via a 12 Volt DC power source.
filename-1
MP1,MP2,MP3 and MP4 are corner marshalling points and the remote controllers only need the ability to switch the corresponding relay for that corner (MP1 to L1, MP2 to L2, MP3 to L3 and MP4 to L4 yellow on diagram). There needs to be no interference between each of these MP points so they can be operated independently of each other. Therefore each MP remote controller only needs to be one (1) channel. 
The RF remote controller CC1 for the remote light control -Is the main central control for the marshalling and is operated by the steward of the event. The Steward will be mobile so this remote controller will not be at any fixed point. To enable the Steward to have total control and over-ride the operations of officials at all MP points this remote controller for the remote light switch will need to be of 6 Channel operation, one channel for each MP (yellow) point (channels 1 to 4) and one channel (number 5) to operate simultaneously all RED receivers on points L1, L2, L3 and L4. This is to enable the stoppage of a race at any time by switching to a “STOP” light at all these points. Button number 6 can be spare.
SG1 – Is for the operation of the starting mechanism for each race (which could be up to 100) during the event.
This long range RC for the remote light switch needs to be 2 Channel to enable the switching of 2 GREEN (GL1 and GL2) lights at the starting area from Channel 1 and Channel 2 will activate 2 solenoids (SR1 and SR2). Therefore the long range RC for the remote light switch needs to be 2 channel and SR1, SR2, GL1 and GL2 receivers all each need to be 1 channel. GL1 and GL2 have to operate simultaneously from Channel 1 and SR1 and SR2 have to work simultaneously from Channel 2.
    According to all the information he has mentioned above, we recommend him a series of long distance wireless remote control kits to remote light switch. The theoretical working distance of the long range RC can reach about 5000m.
2345_image_file_copy_6
These long range RC kits have feedback function and two ways working mode.
With the feedback function, they can let the user know whether he/she had already connected the remote controller and wireless receiver for the remote light switch successfully in such a long distance.
Two ways working mode: When the wireless receiver for the remote light switch gets the signal of remote controller, it will immediately send a return signal to the remote controller. When the remote controller  receives the feedback signal of the wireless receiver for the remotte light switch, the remote controller for the remote light switch will exude a buzzing sound like “D~” which means it receive the feedback signal successfully.
The wireless receiver for the long range RC is waterproof case with waterproof connectors. The wireless receiver for the remote light switch can be installed outdoors. They are also high power remote light switch control kits, each relay output can work at maximum current 30A.
External magnetic sucker antenna with 5meters cable, the antenna for the remote light switch can be installed outside the building to get better working distance
The long range RC kits can be used to remote light switch, agriculture automation, industry automation, and home automation. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.
Share Button