Log In     My Account       Your cart is empty.     SKYPE

Currencies:
     English  


Home >>  DC Power Remote Kits >>  1CH DC 3 Control Modes >>  RF Wireless Wall Mounted Switch Remote Control DC 0~28V Electrical Devices ON/OFF

Stay In Touch

RF Wireless Wall Mounted Switch Remote Control DC 0~28V Electrical Devices ON/OFF


Price: US $36.00

Add to Cart:    Write Review

  • Model: 0020546 (S1X-DC12 & HR-1)

Please Choose:


















RF wireless wall mounted switch is like universal switch from appearance, but it is wireless and operate by RF signal that can pass through walls, floors and doors. 


Feature:
  • Wireless control, easy to install
  • Direct power output; control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances.
  • You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
  • With characteristics of reverse power protection and over current protection
  • Audible / visual indication
  • Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
  • Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
  • One/ several transmitters can control one/ several receivers simultaneously.
  • If you use two or more receivers in the same place, you can set them with different codes.
  • Transmitting Frequency: 315MHz / 433MHz

Receiver:
  • Model No.: S1X-DC06 /S1X-DC09 / S1X-DC12 / S1X-DC24
  • Channel: 1 CH
  • Control Modes: Toggle, Momentary
  • Coding Type: Fixed code
  • Coding Setting: By learning
  • Power Supply (Operating Voltage):DC6V (S1X-DC06), DC12V±1V (S1X-DC12), DC9V±1V (S1X-DC09), DC24V±1V (S1X-DC24)
  • Output: DC6V (S1X-DC06) ,DC12V (S1X-DC12), DC9V (S1X-DC09), DC24V (S1X-DC24)
  • PCB Size: 67mm x 50mm x 18mm
  • Case Size: 75mm x 54mm x 27mm
  • Static Current: ≤6mA
  • Maximum Working Current: 10A

Transmitter:
  • Model No.: HR-1
  • Channel: 1 CH
  • Remote Control Distance:50m / 150ft (theoretically)
  • Encode: Learning code
  • Unit size: 86mm x 86mm x 16mm
  • Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:
  • Setting different control modes (We have set the receiver as Toggle mode before delivery. If you want to use other modes, do as following):
  • 1) Setting control mode Toggle: Only connect Jumper-2.
  • Press button: Turn on the relay, terminal A&B output DC power.
  • Press button again: Turn off the relay, terminal A&B no output.
  • 2) Setting control mode Momentary: Only connect Jumper-1.
  • Press and hold button: Turn on the relay, terminal A&B output DC power.
  • Release button: Turn off the relay, terminal A&B no output.
  • We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote controls, which are stored in the receiver.
  • Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully.
  • Learning the button of remote control:
  • 1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING. 
  • 2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful. 
  • 3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
  • 4) The receiver can learn several remote controls with different codes.

Package Include:
  • 1 x Receiver: S1X-DC06 / S1X-DC09 / S1X-DC12 / S1X-DC24 (1 Channel / Two Control Modes)
  • 1 x Transmitter: HR-1
  • 1 x User manual

Note:

  • The theoretical distance is 100m, which shall be operated in an open ground; no barriers and no any interference. But in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. Therefore, the actual distance can not reach 100m. If you need longer range, please choose other series of remote control, such as CB Serie (1000m/3000ft) - Click here; Or you can add the External Extend Antenna (model:0020909 ) on the receiver for improve the range - Click here.
Ask A Question
* Required information

*
*
ykgz
*